Revell 30ml Decal Soft

Product Information

Edit @ October 2016: use as little water as possible. I use a plastic box lid with just a few drops of water. I have never used revel decal soft, but someone else can probably correct me if I am wrong. I normal use micro-sol and micro-set and presume the revel decal soft works in a similar fashion to micro-sol. Edit @ October 2016: nowadays I spray the entire model with a clear lacquer from Halfords (recommended to me by Phil Stutcinskas, a member of the Forge World studio), instead of painting varnish onto the surface where the decal is going to be applied. This protects the model, eliminates brush marks, and ensures an even finish. A layer of gloss varnish provides a smooth surface for the decal to adhere to. Once you are happy with the position of the decal, dab another paper towel on the decal to soak up any left over water.

Homemade Decal Solvent - FineScale Modeler - Essential Homemade Decal Solvent - FineScale Modeler - Essential

If you like to weather your decals, now’s the time. Google has plenty of advice on doing this if you’ve not done decal weathering before. Like Don S said, decal setting solution and decal softening solution are two different things. I use setting solution (Microsol product with a blue label) under the decal to prevent silvering, and softening solution (the Microsol product with the red label) on the top to soften the decal so it will conform to the surface. Some decals will not soften using the Microsol?, even after applying heat from a hair dryer. My last resort in that case is using denatured alcohol on the decal with the hair dryer. DO NOT get the alcohol on a painted surface or it will eat it up. By process of trial and error (mostly error) I have worked out what I think is the best way to add decals to your miniatures. For anyone who’s built a model kit or wargaming miniature and been really pleased with the paint job, only to have it ruined by crappily finished decals, here’s my guide to doing them right, enhanced by my laughably amateurish diagrams. A recent post on another forum advocated using Tamiya X-20 as a solvent for decals. I have yet to try it, but I will. I have a Hasegawa project with decals that just won't settle down with Microsol. First, of course, I'll try it on a "crash test dummy" with same clear coat and scrap decals. Start off by carefully selecting the decal that you are going to place onto your model. Use a fresh hobby knife blade to cut as close to the artwork/lettering as you possibly can, so there is little or none of the unwanted clear vinyl that the self-adhesive decal is printed on. You can use a pair of scissors to cut out the decal, but you may find that a hobby knife is better suited to the task.I use the Microset/Microsol system myself. It's the blue bottle (MICROSET) which should be brushed onto the model. A dilute solution of white vinegar will serve the same purpose of softening the decal film slightly. The red bottle (MICROSOL) is the one that should be applied later and is a stronger solvent. It's one, or several, applications of this which will get that decal snuggled down. SKY RC e680 AC/DC 80W Charger The SkyRC e680 Universal Charger is easy to use and at the same time offers a variety of features. All popular battery types such... If you are more of a traditionalist, and an array of decals is provided with your model kit, chances are you’ll use them. And for good reason. Decals provide a nice touch of colour, detail, and authenticity to your model, which is especially important for models such as classic planes, or famed Formula 1 racing cars. Revell Decal Soft serves perfectly for applying transfers/decals to a model. After the decal has been positioned on a painted part of the model, using the brush in the bottle cap, apply Revell Decal Soft evenly over the decal. Due to its softening effect the decal can be adjusted to the contours of the model with a firm brush.

Decal Soft Tomedeks Plastic Felt Edge Squeegee - Car Squeegee Decal Soft

While this is often enough to keep the decal in place, if you feel it necessary you can use the second paint brush to apply the second decal solution on top of the decal. This will set it firmly.

Decal solvents, on the other hand, actually soften decals, to help them conform to surface contours and fine detail better. If you are applying decals to a reasonably flat surface with little fine detail, you probably do not need solvent. The Revell Decal Soft 30ml in the modelling accessories range provides a softening solutions to aid in applying decals over uneven surfaces. We avoid CO2 emissions wherever we can! Our remaining carbon footprint is compensated through eco-social projects. House of Hobbies may release account information when we believe, in good faith, that such release is reasonably necessary to (i) comply with law, (ii) enforce or apply the terms of any of our user agreements or (iii) protect the rights, property or safety of House of Hobbies, our users, or others.

How to Apply Decals Correctly Scale Model Tips – How to Apply Decals Correctly

Decals consist of an image printed onto a thin film. The film is brittle and plastic, in the technical sense that it remembers its shape (a flat sheet) and will try to return to it if possible. That means that unless you’re applying the decal to a perfectly flat surface like a mirror, you’re going to end up with gaps underneath the decal, which will result in bubbles that will ruin the finish. Air gaps beneath the decal will result in an uneven finishThe latest discussion I could find on this was three years old so I decided rather than replying to it I would start a new topic. I swear by Testor’s Dull-cote, but Army Painter’s matt spray looks good and there are probably plenty of others. Avoid Games Workshop’s Purity Seal if at all possible, unless you like your minis frosted. Adding a matt finish takes the shine off the gloss varnish without taking away to protective layer. Updated: November 10, 2016 In the threads I could find on this topic the question of is solvent white vinegar or not came up several times. Now when I smell solvent I don't smell vinegar at all. I DO smell vinegar when I open an old jar of Testors Decal Set, which is used to clean and wet the model surface in preparation for the decal. When I smell both Micro Sol and the Daco product I get a mild Acetone smell. For any tight curves or areas that the decal needs to conform to that is not flat, you can apply a little heat using a hairdryer set to low (so as not to distort or melt the decal or model part). Once the decal is in place, carefully warm the area with the hairdryer to make the decal soft so that you can push out any creases or bubbles that may have appeared. Once the decal is in position and you’ve removed the excess water, apply the softener with a brush and leave it for a couple of minutes, before soaking up the excess.